Hardware Build for the Rosetta

Building a Rosetta: 1. Parts · 2. Common build steps · 3a. With the Rosetta PCB · 3b. Without the PCB · 4. Software


A Rosetta is a base box and, optionally, an expansion box. There are two ways to build the boxes:

  • With the Rosetta PCB - the Rosetta circuit board connects everything, and has the signal tower's relays built in.
  • Without the PCB - the Mesa card's headers are brought out to screw-terminal breakout boards, and everything is wired to those.

Both give the same machine, and run the same software.

Step Page
1 Hardware Parts - one parts list for both builds, marked with which build each part is for
2 Hardware Build Common Steps - the two boxes, network, power, DM542T settings, channel plugs and Mesa cards
3a Hardware Build With Rosetta PCB
3b Hardware Build Without PCB
4 Software Installation and Setup - the same for both builds
########## Standard Footer for all pages ##########
 

About the Rosetta System
Terms of Use

eMail comments to
ColvinTools @ Gmail [period] com -> mailto:ColvinTools [snail] Gmail [period] com