How the Rosetta Programs Fit Together

Rosetta is not one program; instead, on the Rosetta system, there are six programs on the machine which work together. Each one has its own job, its own icon, and its own entry on the Applications menu (click on Applications, then the arrow to the right of Rosetta). Rosetta and Rosetta Settings, the two you use every day, also have icons on the desktop. They are related, because they all work on the same machine and share the same settings, but they are independent: each one is started on its own, and none of them starts the others.

Knowing which program does what is the key to finding your way around the system. If you are looking for a setting and cannot find it on the Rosetta screen, it is almost certainly in the Rosetta Settings program.


Programs on the System

Rosetta Rosetta Settings Update Rosetta

The Turk's head

The gear

The green up arrow
What it is: the machine control. It starts LinuxCNC with the Rosetta screens. What it is: the settings program. It tells Rosetta what is connected to the box, and how each device should behave. What it is: the software updater.
Use it to: Use it to:
  • Choose which axis or spindle is on each plug (Axis Selection)
  • Maintain axis and stepper motor configuration settings
  • Setup & maintain device-specific settings (e.g., different settings for a curvilinear slide vs. what would be used for the cross slide)
  • Set up limit switches, the E-stop button, and the signal tower
  • Set your desired measurement system (metric or Imperial)
  • Configure other options to set the way the system works

There are links on many pages in this program to the relevant pages of this User Manual. This is meant to help you understand how to best set the values to achieve what you want.

Use it to:
  • Update all the system software on Rosetta.

This includes:

  • Updates to the Rosetta code
  • Any changes and updates to the config files within Rosetta
  • Updates to LinuxCNC
  • Updates to the operating system (Debian Linux)
  • Updates to the virus scanning system (ClamAV)
Backup Rosetta Rosette Designer Geometric Chuck Designer

The USB Flash Drive

The Rosette

The GeoChuck Design
What it is: a program for copying key user files to a USB flash drive. What it is: a program for designing rosettes in software to test them. What it is: a program for designing geometric patterns in software to test them.
Use it to:
  • Save all your key files just in case something crashes.

There is an option to restore these files in the Settings program.

Use it to:
  • Try a rosette before buying or making one.
  • Cut with a rosette you would need too rarely to be worth making - the program is a software-defined rosette.
Use it to:
  • Try a geometric chuck pattern before cutting it.
  • Cut geometric chuck patterns without a geometric chuck - the program is a software-defined geometric chuck.

Shut Down - at the bottom of the Applications menu, and the red power symbol on the bar that pops up at the bottom middle of the screen - shuts the computer down properly before you switch the power off. See Switching the System Off.

Programs on the Internet


Rosetta Library

There are also programs you can use which are on an Internet site:

  • Rosetta Library - the repository for documentation about Rosetta ( https://rosetta.colvintools.com). The programs listed below are accessible from this site.
  • User Manual - the documentation system you are now viewing ( https://rosetta.colvintools.com/UserManual).
  • Gcode Library - a library of Gcode programs which should be useful to the ornamental turner ( https://rosetta.colvintools.com/Gcode/).
    • These have been vetted and documented to assist you in using them.
    • To use one of the Gcode programs, save it to your gcode library (~/linuxcnc/configs/Rosetta/gcode).
Some of these programs you will run as is; others you might modify or use as the basis for building your own Gcode programs. The online LinuxCNC Gcode Quick Reference is good if you do decide to make your own Gcode program.

How Base LinuxCNC is Different from Rosetta

Rosetta is based on LinuxCNC with the Axis GUI. To that, we added programs and configurations which make LinuxCNC more useful for the ornamental turner. Graphically, you can see the difference in the images below.

 
Base LinuxCNC using the Axis GUI   Rosetta (with the Expansion Box)

Debian Linux - Both systems run on Debian Linux which is a very solid version of Linux, and which also allows for operation as a real-time operating system. Debian is an open-source software operating system developed and maintained by the Debian Project.

LinuxCNC - LinuxCNC (initially called Enhanced Machine Controller, or EMC2) was built by the U.S. National Institute of Standards and Technology in 1993 to reduce the cost for implementing an automation system for manufacturing.

  • LinuxCNC implements a very powerful, standardized version of Gcode. The standard, RS274/NGC, is also defined by the International Standard, ISO 6983-1:2009. This enables you to develop your own Gcode programs and execute them on LinuxCNC.
  • LinuxCNC is now an open-source software application which continues to be maintained and upgraded by a community of devotees.

More Than a Few Add-ons


LinuxCNC’s Tux (left) and Rosetta (right)

But there is more to it than that. We have tried to provide an environment for using the system which makes it easy for you to make great art.

  • Debian Linux Code Updates - And as with other computer operating systems, updates are needed to Debian to keep it running.
Updates to it can be made using the standard means (sudo apt update / sudo apt upgrade); however, the Rosetta Upgrade program (the big green arrow) issues these commands for you.
  • LinuxCNC Code Updates - also has updates over time.
LinuxCNC updates are provided using the standard means (sudo apt update / sudo apt upgrade); however, the Rosetta Upgrade program (the big green arrow) issues these commands for you.
  • Virus Scanner Updates - LinuxCNC is considered very secure; however there are many bad players out there on the internet. We have chosen to add ClamAV to the Rosetta system as an extra measure of security. (This can be added to other LinuxCNC systems but is not by default.)
ClamAV is an open-source software application which continues to be maintained and upgraded by a community of devotees. Updates to the application are provided using standard means (sudo apt update / sudo apt upgrade / freshclam); however, the Rosetta Upgrade program (the big green arrow) issues these commands for you.
  • Fixes to the Update Process - As with many operating systems, there are occasional issues encountered with the upgrade process (sudo apt update / sudo apt upgrade). When we encounter these, we add the fix for that issue into the Rosetta Upgrade program (the big green arrow) so that you do not have to research the needed actions. It may require you to run the Upgrade program twice, but the issue will be resolved for you.
  • Rosetta Code Updates - We expect to provide updates over time. The Rosetta Upgrade program (the big green arrow) will pull these down to your system, and will make any updates to the on-board files for you.

And Some Bases to Help Users

  • Rosetta User Manual - the on-line user manual for Rosetta is provided for helping users of the system.
  • Rosetta Support Manual - the on-line support manual for Rosetta is where we document a lot of technical details to keep those documents readily at hand.
  • Rosetta User Forum - the on-line user forum for Rosetta is provided for helping users of the system.
  • Rosetta Preconfigured Hardware - Being able to purchase an off-the-shelf system which you can plug in and immediately start using is a great option for the ornamental turner who does not want to get into building their own system.
We worked to select hardware which
  • meets the application needs,
  • can be sourced at reasonable costs, and
  • can be provided by vendors reliably over time.
A number of products were tested which did not meet our expectations, but in the end, we were able to identify some good options.
We also developed a customized printed circuit board (PCB) which makes the wiring far easier (reducing the cost) and also makes the system more reliable.
  • Rosetta Cabling Standards - The standards for cabling we have selected help to reduce problems for the user, and eliminate the need to do your own research.
The cable ends were selected to provide:
  • Ease of use
  • Secure connections (so the cables do not get accidentally disconnected)
  • Sizes and types which ensure you do not plug each device into the wrong jack
  • Rosetta Configuration Application - A rose engine's user needs the ability to reconfigure the system as necessary for the art to be produced. These changes can necessitate changes to the way LinuxCNC is configured. Traditionally, that was done by editing a text file, and requires a good knowledge of what to change (and what to not change).
The Rosetta Settings program (the big gear) makes all this much easier, and has protections built in to help ensure you do not make settings which would make your system work poorly (or not work).
  • Rosetta Backup Application - There are a number of files you would probably hate to lose: these include your current settings, and any Gcode programs you are using. This program makes it easy to copy those files to a USB flash drive.
  • LinuxCNC User Manual - the on-line user manual for LinuxCNC is very good. It applies to the base system, and we doubt you will ever need it, but it can be useful for the Rosetta user also.
  • LinuxCNC User Forum - the on-line user forum for LinuxCNC is also very good. It applies to the base system, and we doubt you will ever need it, but it can be useful for the Rosetta user also.
########## Standard Footer for all pages ##########
spacer line

About the Rosetta System
Terms of Use

eMail comments to
ColvinTools @ Gmail [period] com -> mailto:ColvinTools [snail] Gmail [period] com